CNC Coolant Concentrations – Determining the Proper Cooling Level for Your CNC Machinery

Let us discuss CNC Coolant: A Review of How to Choose and Use This Proprietary Cooling System! First, let me tell you what CNC stands for: Computer Numerated Control, which just means a computer numerical controlled. In other words, CNC means that the machine (CNC) has a computer numerical control programmed into it that controls the steps and positions of cutting tools. CNC coolants are used in many different ways in CNC machines to help keep machines cool during operation, and to help maintain machined surfaces at their best possible condition, even under high stress. This article will discuss exactly how CNC coolants work, why you should use them, and why you should never cut metal with an abrasive material.

How CNC coolants help your CNC cutting machinery?

Well, if you’ve ever been inside a CNC machine that was running at full tilt and sawing at a piece of wood, then you probably already know why this stuff is so important to keeping things cool. First, coolant helps keep parts and pipes cool because it expands and contracts depending on the temperature outside, and then further because it also works as an antifreeze. When you’re running the CNC machine at full tilt, not only does the tool run faster, but it also creates a much larger cross section of moving area, which means that more of the moving area is now open to the atmosphere. Any heat energy that was stored by the original heat inside the machine is now spread out over a much larger area, so the machine does not have to work as hard, and it allows the tools to perform at their most optimum capability.

Read More  Six key aspects of sales and operations planning

How to operate it?

So, what is the proper CNC coolant concentration to use when operating CNC machinery? If you’re using pre-cooled chips, then you should be fine, but if you’re using chips that need to go into a vacuum condition before being sent into the actual CNC process, you might need a higher coolant concentration than normal. Also, if you’re using anodized aluminum chips in your CNC machines, you might want to go with a lower coolant concentration to prevent metal corrosion. Also, if you are running your CNC machines in a container such as a plastic (and most of the CNC machines are actually stored in plastic as well), you should go with a low enough concentration of the coolant to keep everything at the proper temperature.

 

Leave a Comment